Power Tank DP
The Pedrollo “Power Tank” is a cold water power booster set designed for use in domestic and
light commercial properties where existing water pressure is insufficient to meet demand, or
separation from the mains is required. The use of quality components and materials gives long
and reliable use combined with space saving set design, incorporating a quiet running submersible
pump mounted in the tank to provide a compact low cost solution that is easy for a qualified
plumber to install.
Standard Features
|
|
DP75 |
DP250 |
|
Tank - Type A air gap, storage tank in Polypropylene, capacity |
100L |
250L |
|
Unit size : 700 mm x 500mm x 870mm |
● |
|
|
Unit size : 970mm x 700mm x 940mm |
● |
|
|
Max Flow rate (litres/minute) @ approx 3 Bar |
30 | 70 |
|
Pump – submersible, AISI 304 Stainless steel |
NKm2/1 |
NKm2/3 |
|
“Tank Empty” protection with auto reset |
● |
|
|
Variable speed upgrade for constant pressure |
● |
|
|
Expansion vessel - Steel body with butyl rubber diaphragm |
2L | 5L |
|
Connections- Inlet ½ ”BSP male / Outlet 1” BSP male |
● |
● |
|
Packaged “ready for use” with 1 meter of cable and fitted plug |
● |
● |
Benefits
• Instant “on demand” supply to boiler and taps
• Low noise
• Quick and easy installation
• Fit and forget
• Compact
• Cost effective
• Reliable
Maximum operating conditions
• Liquid temperature range : +3 to +40oC
• Maximum operation pressure : 3.6 Bar (75) / 6 Bar (250)
• Recommended maximum start/stop per hour : 20
Electrical data 240V 1Ph 50Hz
|
Pump Model |
Controller |
Running Current |
Input Power |
|
NKm 2/1 |
Brio 2000MT |
4.5 | 450 |
|
NK 2/3 |
Sirio |
4.5 |
750 |