DOWNLOAD PDF FOR FULL DETAILS INC PERFORMANCE CURVES AND DIMENSIONS

Flow rate up to 1600 1/min (96 m3/hr)
Dynamic head up to 24 m

OPERATING LIMITS

Maximum operating depth 10m
Fluid temperature up to + 50 °C
Maximum passage for suspended solids Ø 70mm

Submersible high efficiency, stationary version, SINGLE VANE pumps for professional use. Built using quality materials and oversized, extremely reliable and suitable for continuous heavy duty service. Uses include dirty water, sewage, industrial waste etc. The design of the impeller optimizes efficiency while allowing the pump to handle muddy water containing solids and short fibres, without problem.

PUMP INSTALLATION AND APPLICATIONS

The single vane type impeller fitted to PMC pumps makes them suitable for handling dirty water, sewage, effluent water, water mixed with mud. PMC pumps are particularly suited for installation in sewers, excavation sites, wells, channels, underground carparks etc.

Manufactured entirely in extremely thick cast iron, these pumps are particularly sturdy, abrasion- resistant and built to last. They are supplied with delivery flange, discharge connector and guide rails for fixed installation

STRUCTURAL CHARACTERISTICS

• Cast iron PUMP BODY, with UNI ISO 228/1 gas threaded delivery ports.
• Cast iron BASE and MOTOR HOUSING
• Cast iron IMPELLER
• AISI 304 stainless steel motor shaft (430F up to 0.75kW)
• Screws in contact with fluid in Stainless steel. (Optional stainless steel lifting eye)
• DOUBLE SEAL SYSTEM Ceramic/silicon carbide on the pump side and lip seal on the motor side (with barrier oil chamber to lubricate and cool the sealing surfaces in the absence of water).
• Sealed induction MOTOR: with double impregnated class F winding (ensuring extended motor life and wide range of use), designed for continuous duty, even with the pump partially submerged (min. 430mm) A thermal cutout device (motor protector) is incorporated in single phase models.
• Three phase motors have three thermal cut-outs in the windings, connected in series with the supply cable. They must be correctly connected to the pump control panel by the user.
• PROTECTION IP 68.
• CONTROL BOX (single phase models only) with capacitor and manual reset, IP64
• SUPPLY CABLE -
  Single phase : 10 metres of neoprene HO7 RN-F submersible cable
  Three phase: 10 metres of neoprene FG5 OK 4x1.5mm + 2 x 0.5mm
• EXTERNAL FLOAT SWITCH for single phase models
• CONSTRUCTION AND SAFETY STANDARDS in compliance with EN 60 335 -1, CEI 61-150), EN 60034-1), (IEC 34-1, CEI 2-3)